Making an embroidered patch with a machine is time-consuming but becomes a breeze once you completely comprehend it. Chances are high that beginners will find the procedure perplexing as it involves various complexities. Many questions might arise, like what steps does the process include, and does it require a stabilizer? Or what type of backing is right? If you have these or other queries and want to know the exact process of creating embroidered patches with a machine, we have you covered.
This blog will lay down all the steps required for its creation and all other relevant information. So, without taking further ado, let’s get started.
11 Easy Steps To Make Embroidered Patches With A Machine
STEP 1: Hoop The Stabilizer
The first step is to hoop your water-soluble stabilizer properly. Hooping is the process of preparing the fabric for embroidery. You can do this with frames or hoops consisting of two rings. Generally, one must keep a fabric between both rings to secure the cloth and accelerate the embroidery process.
STEP 2: Prepare The Machine
Once you hooped the stabilizer, load the hoop in the machine and set up the top and bobbin threads. Load the design file in the sewing technology and confirm the stitching order of the parts.
STEP 3: Start Stitching The Placement Line (Optional)
Once your machine is ready, start stitching the placement line on the stabilizer. This step is for you if you are using a base fabric. Otherwise, start embroidering your embroidered patches without any worries. Although this step is a little more tricky, but you can ease it with the help of embroidered patches NZ services!
STEP 4: Include A Base Fabric
In this step, you must place the base fabric on the line. If you observe a slight shifting after placement, apply a light layer of any solid adhesive force. It will hold everything in place. Note that the base fabric should adequately align with the outline of the placement stitch. Even slight mismanagement can cause excess material to hang outside the border and will give a bad look.
STEP 5: Stitch On The Tacking Stitch
Stitching on the tacking stitch secures the base fabric with the stabilizer. Depending on the type of design you go for, you may have to choose between running and zigzag stitch. Once your sewing process of tacking stitch completes, trim the fabric close to the edge. And in case you accidentally cut a few stitches, you don’t need to stress yourself over it. Instead, cover those trims with faux-merrow or satin stitch. Another way to fix it is to restitch the tacking line once again.
STEP 6: Sew The Inner Side Of the Patch
Irrespective of whether the patch is made up of 100% threads or not, sew all around from the inner side. Plus, you can also change the colors of threads if required.
STEP 7: Finally, Stitch The Edges
Now is the time to stitch the edges of the border, and be careful not to let the badge pop out of the stabilizer.
STEP 8: Clean Up The Border
By now, the stitching process ends, and therefore, remove the hoop from the machine and release the stabilizer. The embroidered badge would come off quickly if you used a satin border and film-thin water-soluble stabilizer. However, if it isn’t the case, trim it carefully with scissors. Also, dab a bit of water on the border to remove any residue of the stabilizer. Moreover, if you went for a bean sewing type for your edge, trim a bit far away from your border. After that, cut the outline by yourself. Another option is to run it down the water to let the stabilizer automatically detaches from the outline.
STEP 9: Trim The Loose Ends Of Backing
After cleaning up the edges, it is time to move toward the backing. Trim any loose threads that you see on the back side of badges. To remove the residual stabilizer from the backside, run it under the tap water and let it dry. Another option comes if you don’t want to keep your embroidered patch under tap water. Place the badge underneath a moist paper towel and dry the iron at medium heat to remove the residues of the water-soluble stabilizer.
STEP 10: Start Making The Backing For Your Patch
Here comes the second last step: make the backing of your choice for your badge. If you want your embroidered badges to be an iron-on patches, apply fusible webbing to the back. If you aim to give your cotton badge a professional look, consider investing in the heat press machine. It will benefit you by bringing ease in several stages and applying fusible webbing to the back of the emblem using a heat presser. And if you are making it as a hobby and for personal use, a household iron will also pull off a good job. Whenever applying an adhesive to the backing, vigilantly pore instructions on the packaging of the fusible product. Generally, though, after assuming the size of your emblem, you should cut the piece of fusible webbing.
STEP 11: Apply Fusible Webbing On The Backing
Once you have cut the fusible webbing, turn over the badge. Make sure not to let them both move around. Now, you have two options to fuse them both. The first is to use a heat press, while the other is to take the help of a steam-free hot iron. The choice is up to you!
However, keep a pressing sheet underneath and over the surface of the badge while offering them heat. It will prevent any damage to the emblem. Don’t touch or move them right after giving them firm heat until the temperature of the badge is back to normal. And finally, it is ready. Remove the paper layer whenever you want the embroidered badge to adhere somewhere. And stick the iron-on surface to your desired spot.
The Final Thoughts:
And this was the complete eleven steps guide for how to make embroidered patches with a machine. Hopefully, you will have got a proper understanding of the procedure. Follow all these steps carefully to achieve the best results. If you feel we missed anything, let us know by commenting down below!
Add a Comment